PassLeader Valid 2V0-641 Dumps with VCE and PDF (Question 76 – Question 90)
100% valid 2V0-641 exam questions from PassLeader 2V0-641 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 2V0-641 VCE and PDF dumps: http://www.passleader.com/2v0-641.html (189 Q&As)
P.S. Free & New 2V0-641 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpcEV1VU1VUkNtaG8
QUESTION 76
You are managing three ESXi 5.1 hosts attached to a vSphere Distributed Switch (vDS) using the default settings. You need to provide LACP Active Mode connectivity for the two 10Gb uplinks of each host attached to the Uplink Port Group of the vDS. Using VMware best practices, which option shows the steps required to configure use of LACP?
A. Upgrade all ESXi hosts to ESXi version 5.5.
Create a new version 5.5 vDS.
Use the Add and Manage Hosts option to migrate the hosts to the new vDS.
Configure the appropriate LACP settings.
B. Upgrade all ESXi hosts to ESXi version 5.5.
Create a new version 5.5 vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS.
Upgrade all virtual machines to hardware version 10.
Configure the appropriate LACP settings.
C. Upgrade all ESXi hosts to ESXi version 5.5.
Upgrade the existing vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS.
Upgrade all virtual machines to hardware version 10.
Configure the appropriate LACP settings.
D. Upgrade all ESXi hosts to ESXi version 5.5.
Upgrade the existing vDS to version 5.5.
Configure the appropriate LACP settings.
Answer: D
QUESTION 77
An organization has a vSphere environment configured with two adapters on each ESXi host. The physical network is configured to use Etherchannel. Based on the available options, what is the best option for load balancing traffic on the ESXi hosts?
A. Configure a vSS using the Route based on originating virtual port load balancing setting.
B. Configure a vDS using the Route based on physical NIC load load balancing setting.
C. Configure a vDS using the Route based on source MAC hash load balancing setting.
D. Configure a vSS using the Route based on IP hash.
Answer: D
QUESTION 78
Your company has a policy regarding the use of distributed virtual port groups for application deployments that requires all port configurations to maintain a finite maximum. What two configuration options will assure that only a finite, specific number of ports can be configured on a distributed virtual port group? (Choose two.)
A. Configure the Port binding option value for Ephemeral.
B. Configure the Port allocation option value for Elastic.
C. Configure the Port binding option value for Static Binding.
D. Configure the Port allocation option value for Fixed.
Answer: CD
QUESTION 79
What is the minimum number of vSphere Distributed Switches (vDS) that must be configured before deploying VMware NSX for vSphere?
A. 0
B. 1
C. 2
D. 4
Answer: B
QUESTION 80
Which option is VMware’s best practice for the deployment of NSX Manager and NSX Controller components?
A. Deploy the NSX Manager and NSX Controller components to a management cluster.
B. Deploy the NSX Manager component to a management cluster and the NSX Controller components to a resource cluster.
C. Deploy the NSX Controller components to a management cluster and the NSX Manager component to a resource cluster.
D. Deploy the NSX Manager and NSX Controller components to a resource cluster.
Answer: A
QUESTION 81
What is the appropriate source from which to deploy the VMware NSX Manager component?
A. Open Virtualization Appliance (OVA) file
B. VMware Infrastructure Bundle (VIB) file
C. VMware vSphere Update Manager update baseline
D. MSI install package
Answer: A
QUESTION 82
What is a prerequisite to deploying a Logical Switch?
A. Configure the VXLAN Tunnel Endpoint’s (VTEP) VLAN on the trunk in the physical switches.
B. Add the ESXi hosts to the same vSphere Distributed Switch.
C. Prepare and configure VTEPs on the ESXi hosts using the vSphere Web Client.
D. Create a port group on the vSphere Distributed Switch.
Answer: A
QUESTION 83
A NSX administrator attempts to create a Logical Switch, but assigns it a name of an existing Logical Switch. What will be the result?
A. The Logical Switch is created with the name assigned by the NSX Administrator.
B. NSX Manager will append a two digit number to the Logical Switch name, starting with 01.
C. The Logical Switch can’t be attached to a Redistributed Router until it’s name is changed.
D. An error message is displayeD.Unable to allocate an available resource.
Answer: A
QUESTION 84
Which scenario can be configured to use 3DES encryption for virtual machine traffic?
A. Two virtual machines communicating across a point-to-point IPSec VPN connection.
B. Two virtual machines running on different ESXi hosts communicating across the same logical switch.
C. Two virtual machines communicating across a layer 2 bridge.
D. Two virtual machines configured to use NSX Data Security.
Answer: A
QUESTION 85
After consulting with the network team, it is decided that Transport Zones will be configured with Unicast Replication Mode for a new NSX for vSphere deployment. Which statement is true regarding the function of the VXLAN Tunnel End Points (VTEPs)?
A. The VTEPs will send unicast frames to the NSX Controllers when the VTEPs do not have a MAC address in the MAC table.
B. The VTEPs will switch to Multicast Replication Mode for those VTEPs to which multicast path discovery is successful.
C. The VTEPs will send multicast frames to all other VTEPs in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.
D. The VTEPs will send unicast frames to all local VTEPs and remote proxies in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.
Answer: D
QUESTION 86
Which is the transport protocol and port number used in VMware’s implementation of VXLAN in NSX for vSphere?
A. UDP, port number 8472
B. UDP, port number 4789
C. TCP, port number 4789
D. TCP, port number 8472
Answer: A
QUESTION 87
What is a requirement of the physical network for VXLAN to operate correctly when deploying NSX for vSphere?
A. Configure Jumbo Frames.
B. Configure PIM in Sparse or Dense mode.
C. Multichassis Link Aggregation (MLAG) on the Top of Rack switches.
D. IPv4 enabled in the local segment where the VTEPs are connected.
Answer: A
QUESTION 88
Where is the layer 2 bridge instance deployed when configuring a bridge connection between a logical switch and a VLAN?
A. On the ESXi host running the logical router
B. On the ESXi host running the logical switch
C. On both ESXi hosts that make up the layer 2 bridge
D. On each virtual machine that will utilize the layer 2 bridge
Answer: A
QUESTION 89
What is the maximum number of Distributed Router Logical Interfaces that can be connected to a Logical Switch?
A. 1
B. 2
C. 1200
D. 2000
Answer: A
QUESTION 90
How many Logical Interfaces can be assigned to a single Distributed Router instance?
A. 1
B. 12
C. 1000
D. 1200
Answer: C
100% valid 2V0-641 exam questions from PassLeader 2V0-641 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 2V0-641 VCE and PDF dumps: http://www.passleader.com/2v0-641.html (189 Q&As)
P.S. Free & New 2V0-641 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpcEV1VU1VUkNtaG8