[13-Apr-2025] New 2V0-11.25 Dumps with VCE and PDF from PassLeader (Update Questions)

100% valid 2V0-11.25 exam questions from PassLeader 2V0-11.25 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 2V0-11.25 VCE and PDF dumps: https://www.passleader.com/2v0-11-25.html (99 Q&As)

P.S. Free & New 2V0-11.25 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1_yZyc4K5JnmsVuYnWEFwJajSPz-d8coF

NEW QUESTION 1
An administrator needs to configure Network IO Control (NIOC) on a Virtual Distributed Switch (VDS) to prioritize storage traffic over other types of traffic. Which two steps should be followed? (Choose two.)

A.    Disable all other traffic types to ensure storage traffic gets full bandwidth.
B.    Navigate to the VDS settings in the vSphere Client and enable NIOC.
C.    Migrate all VM traffic to a standard switch.
D.    Create a new port group specifically for storage traffic.
E.    Assign shares and limits to the new port group to prioritize the storage traffic.

Answer: BE
Explanation:
Network IO Control (NIOC) must be enabled on the Virtual Distributed Switch (VDS) via the vSphere Client to begin configuring and managing bandwidth allocation and prioritization for different types of traffic. After enabling NIOC, you can assign shares and limits to the specific port group (in this case, for storage traffic) to prioritize the traffic over other types of network traffic.

NEW QUESTION 2
An administrator is deploying an NSX Edge cluster from SDDC Manager. The administrator plans to configure the Border Gateway Protocol (BGP) to enable dynamic routing with the upstream physical networking. Which three values must be provided when configuring BGP? (Choose three.)

A.    BGP Password
B.    BGP Autonomous System Number (ASN)
C.    BGP Router ID
D.    BGP Peer IP
E.    BGP Route Topology

Answer: BCD
Explanation:
The BGP Autonomous System Number (ASN) is a unique identifier that must be configured for BGP to define the routing domain. The BGP Router ID is used to uniquely identify the BGP router in the network. The BGP Peer IP is required to establish a BGP peering relationship with an upstream router or another BGP-enabled device.

NEW QUESTION 3
Which option should be chosen when placing a vSAN host into maintenance mode to ensure all data remains accessible during maintenance, while minimizing the time required to complete the operation?

A.    Quick Migration
B.    No Data Migration
C.    Ensure Accessibility
D.    Full Data Migration

Answer: C
Explanation:
When placing a vSAN host into maintenance mode, choosing “Ensure Accessibility” ensures that all data remains accessible during the maintenance operation. It moves data off the host only if necessary, prioritizing accessibility while minimizing downtime. This option is designed to minimize the time required to complete the operation compared to “Full Data Migration”.

NEW QUESTION 4
What is the primary benefit of enabling Workload Management on a vSphere Cluster?

A.    It integrates vSphere with third-party cloud providers.
B.    It enhances the security of the vSphere environment.
C.    It allows the deployment of traditional VMs with enhanced performance.
D.    It enables the use of Kubernetes for container orchestration on the vSphere platform.

Answer: D
Explanation:
Enabling Workload Management on a vSphere Cluster allows the use of VMware vSphere with Tanzu, which enables the deployment and management of Kubernetes clusters directly on vSphere. This integration allows for container orchestration, making it easier to deploy, manage, and scale containerized applications alongside traditional VMs in the same environment.

NEW QUESTION 5
Which two SDDC Manager operations can be executed on an NSX Edge cluster after it has been deployed? (Choose two.)

A.    Redeploy
B.    Sync
C.    Expand
D.    Delete
E.    Shrink

Answer: BD
Explanation:
After an NSX Edge cluster has been deployed, you can perform a sync operation to ensure the NSX Edge cluster is in sync with the configuration in SDDC Manager. Deleting an NSX Edge cluster can be done after it has been deployed if it is no longer required or needs to be removed from the environment.

NEW QUESTION 6
An organization is integrating VMware vCenter with Active Directory (AD) to streamline user authentication. As part of this process, the administrator needs to add AD as an identity source in vCenter. Which three steps must be performed to successfully add AD as an identity source? (Choose three.)

A.    Enter the Domain Name and the credentials of an AD user with domain join privileges.
B.    Configure DNS settings on all ESXi hosts to point to the AD DNS servers.
C.    Select “Add Identity Source” and choose “Active Directory (Integrated Windows Authentication)”.
D.    Reboot the vCenter Server to apply the identity source settings.
E.    Navigate to the vCenter Single Sign-On configuration in the vSphere Client.

Answer: ACE
Explanation:
When adding AD as an identity source, you need to enter the Domain Name and provide the credentials of an AD user with domain join privileges to authenticate and add the domain. In the vSphere Client, you need to select “Add Identity Source” and choose the appropriate method for AD integration, which is typically “Active Directory (Integrated Windows  Authentication)”. The process to add AD as an identity source is performed under the vCenter Single Sign-On (SSO) configuration in the vSphere Client.

NEW QUESTION 7
After deploying the VMware Cloud Foundation management domain, an administrator needs to configure backup for the components within the domain. Which two steps are involved in configuring the backup of VMware Cloud Foundation management components? (Choose two.)

A.    Configure an external SFTP backup repository on the SDDC Manager.
B.    Manually export the NSX configuration to the SDDC Manager.
C.    Enable the vCenter Server snapshot manager on the SDDC Manager.
D.    Install a third-party backup solution on each ESXi host.
E.    Create a backup schedule on the SDDC manager to automate taking regular backups.

Answer: AE
Explanation:
To configure backups for the VMware Cloud Foundation management components, you must set up an external SFTP backup repository within the SDDC Manager. This repository will store the backup files for management components like vCenter, NSX Manager, and SDDC Manager itself. Creating a backup schedule within the SDDC Manager ensures that regular, automated backups are taken, helping to maintain data integrity and recovery options for the management domain.

NEW QUESTION 8
An administrator has deployed a new VMware Cloud Builder appliance using the downloaded OVF file. While attempting to use the VMware Cloud Builder interface, the administrator discovers that no connection can be established to the appliance. Which three configuration errors may have occurred? (Choose three.)

A.    VLAN misconfiguration.
B.    Incorrect DNS settings or inaccessible DNS servers.
C.    Incorrect NTP settings or inaccessible NTP servers.
D.    Incorrect Static IP configuration.
E.    BGP routing misconfiguration.
F.    Incorrect Dynamic IP configuration.

Answer: ABD
Explanation:
A VLAN misconfiguration could prevent proper network connectivity, particularly if the appliance is not in the correct VLAN or if there is a misalignment in network segmentation. Incorrect DNS settings or inaccessible DNS servers can prevent the VMware Cloud Builder appliance from being able to resolve hostnames, leading to connection issues. Incorrect Static IP configuration would result in the appliance being unreachable because it won’t have the correct IP address or network configuration to communicate with other components.

NEW QUESTION 9
While preparing to enable Application Virtual Networks (AVNs) and deploying Aria Suite components, an administrator plans to deploy an NSX Edge cluster. What is a requirement for deploying the NSX Edge cluster?

A.    The Edge transport nodes must be configured with an MTU of 1500.
B.    The Edge cluster must be deployed in the management domain.
C.    The Edge transport nodes must be deployed using the “large” form factor.
D.    The Edge cluster must be configured for NSX Federation.

Answer: B
Explanation:
When deploying an NSX Edge cluster in a VMware Cloud Foundation (VCF) environment, it must be deployed in the management domain. The management domain is responsible for managing and orchestrating various resources, including the NSX Edge cluster, which is crucial for network virtualization and security within the environment.

NEW QUESTION 10
An administrator is tasked with deploying a new application that requires both virtual machines and containers. Which two components of VMware Cloud Foundation would be utilized to provide a unified platform for managing these workloads? (Choose two.)

A.    Aria Operations
B.    IaaS Control Plane
C.    HCX
D.    NSX
E.    Aria Suite Lifecycle

Answer: AD
Explanation:
– Aria Operations: Aria Operations (formerly vRealize Operations) provides a unified platform for managing both virtual machines (VMs) and containers, offering monitoring, analytics, and performance management for the entire environment.
– NSX: NSX provides network virtualization and security, which can be used to manage network traffic for both VMs and containers, offering a consistent networking model for both workloads.

NEW QUESTION 11
An administrator is preparing to deploy VMware Aria Suite Lifecycle using SDDC Manager. Which three are prerequisites for deploying Aria Suite Lifecycle? (Choose three.)

A.    Ensure that a custom SSL certificate specifying the FQDN of the appliance is available.
B.    Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components.
C.    Verify that the password for the admin(g>local user account meets the complexity requirements.
D.    Ensure that the Application Virtual Networks have been configured.
E.    Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository.

Answer: ABE
Explanation:
– Ensure that a custom SSL certificate specifying the FQDN of the appliance is available: A custom SSL certificate for the FQDN of the Aria Suite Lifecycle appliance is required for secure communication between components.
– Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components: Accurate NTP and DNS settings are crucial for time synchronization and proper domain resolution in the environment.
– Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository: The required software bundle must be available in the local repository to ensure successful deployment.

NEW QUESTION 12
What is the first step in downloading the vSphere CLI tools to a developer workstation?

A.    Register the developer workstation with the Active Directory.
B.    Install a compatible version of Java Runtime Environment.
C.    Visit the VMware Downloads page and locate the vSphere CLI tools.
D.    Configure the workstation’s network settings to connect to the vSphere environment.

Answer: C
Explanation:
The first step in downloading the vSphere CLI tools is to visit the VMware Downloads page, where the vSphere CLI tools are available. From there, you can select the appropriate version for your environment and begin the download process.

NEW QUESTION 13
An Administrator is configuring the network within their VCF management domain in preparation to deploy VMware Aria Suite Lifecycle. What are the two types of virtual networks that the Administrator could configure to support the deployment? (Choose two.)

A.    VLAN-backed Port Groups
B.    Overlay-backed NSX Segments
C.    VXLAN-backed Network Pools
D.    VLAN-backed NSX Segments

Answer: AB
Explanation:
– VLAN-backed Port Groups are used in traditional network environments where VLANs are configured on the physical switches. These port groups can be configured in the management domain to support network connectivity.
– Overlay-backed NSX Segments use NSX to create virtual networks overlaid on existing physical networks, which is essential for network virtualization and communication between virtual machines, especially in a VMware Cloud Foundation environment.

NEW QUESTION 14
An administrator needs to ensure that specific virtual machines within a VMware Cloud Foundation environment use storage that can tolerate at least two host failures. As resources are limited, the configuration should use the available resources as efficiently as possible. Which three steps should be performed to configure a storage policy that meets the requirements? (Choose three.)

A.    Create a new VM Storage Policy in the vSphere Client.
B.    Set Failures to Tolerate to “2 failures – RAID-1 (Mirroring)” in the policy configuration.
C.    Reconfigure the existing Default Storage Policy in the vSphere Client.
D.    Apply the storage policy to the target VMs.
E.    Set Failures to Tolerate to “2 failures – RAID-6 (Erasure Coding)” in the policy configuration.
F.    Configure the policy to use thin provisioning.

Answer: ADE
Explanation:
A new VM storage policy needs to be created in the vSphere Client to define specific requirements for the storage configuration, including tolerance for two host failures. Once the storage policy is created, it must be applied to the specific virtual machines that require the storage configuration that tolerates two host failures. To ensure the storage configuration tolerates two host failures efficiently, RAID-6 (Erasure Coding) is the appropriate choice. RAID-6 can tolerate two host failures while minimizing resource usage compared to other configurations like RAID-1.

NEW QUESTION 15
When configuring a new port group on a Virtual Distributed Switch (VDS), what is the purpose of setting a VLAN ID?

A.    To manage storage replication settings.
B.    To segment and isolate network traffic.
C.    To automate the creation of VMs within the port group.
D.    To enable load balancing across multiple uplinks.

Answer: B
Explanation:
Setting a VLAN ID on a port group on a Virtual Distributed Switch (VDS) allows for network segmentation by tagging traffic with the appropriate VLAN ID. This enables isolation of network traffic between different VLANs, ensuring that communication is restricted to specific segments of the network as required.

NEW QUESTION 16
A VMware Cloud Foundation administrator notices that the SDDC Manager dashboard shows an alert indicating that one of the ESXi hosts in their workload domain is in a Not Responding state. What is the first troubleshooting step that should be performed to resolve this issue?

A.    Remove and re-add the ESXi host to the workload domain.
B.    Upgrade the ESXi host to the latest version.
C.    Check the network connectivity between the ESXi host and the SDDC Manager.
D.    Reboot the ESXi host from the SDDC Manager interface.

Answer: C
Explanation:
When an ESXi host is in a “Not Responding” state in VMware Cloud Foundation, the first step in troubleshooting is to check the network connectivity between the ESXi host and the SDDC Manager. Network issues (e.g., misconfigured VLANs, firewall settings, or network outages) are often the primary cause of communication problems between SDDC Manager and the ESXi host.

NEW QUESTION 17
An Administrator is tasked with setting up a new workload domain with VMware Cloud Foundation. The workload domain will have the following configuration:
– vSphere with Tanzu to support Kubernetes workloads.
– NSX for container and virtual machine networking.
– Aria Operations will be configured for monitoring of the infrastructure.
Which three steps should be taken to complete the installation and configuration of this workload domain? (Choose three.)

A.    Install Aria Operations agents on all ESXi hosts.
B.    Integrate IaaS Control Plane with the existing vCenter Server.
C.    Configure NSX segments for Kubernetes namespaces.
D.    Deploy the Supervisor Cluster for IaaS Control Plane.
E.    Enable workload management in vCenter Server.

Answer: CDE
Explanation:
NSX segments need to be configured for Kubernetes namespaces to provide network connectivity and isolation for the Kubernetes workloads that will be deployed. The Supervisor Cluster must be deployed as part of the IaaS Control Plane to manage the Kubernetes workloads and enable vSphere with Tanzu. Enabling workload management in vCenter Server allows the deployment and management of Kubernetes workloads alongside virtual machines, utilizing vSphere with Tanzu.

NEW QUESTION 18
Which four storage options are available in the SDDC Manager UI during deployment of a VI workload domain in VMware Cloud Foundation? (Choose four.)

A.    iSCSCI
B.    NFS
C.    vVol
D.    DATASTOR
E.    VMS on NFS
F.    VMFS on FC
G.    vSAN

Answer: BCFG
Explanation:
– NFS: NFS (Network File System) can be used as a storage option during the deployment of a VI workload domain, typically for storing virtual machine files.
– vVol: vVol (Virtual Volumes) provides a storage framework to allow for policy-driven management of virtual machine storage.
– VMFS on FC: VMFS (VMware File System) on Fibre Channel (FC) provides block-level storage for virtual machines and is widely used in VMware environments.
– vSAN: vSAN (Virtual SAN) is VMware’s hyper-converged storage solution, which combines compute and storage resources in a VMware environment, and is available as a storage option for a workload domain.

NEW QUESTION 19
When commissioning new hosts in VMware Cloud Foundation, which three parameters must be provided? (Choose three.)

A.    Network Pool Name
B.    Storage Type
C.    Hardware Type
D.    SSO Domain Name
E.    ESXi Version
F.    Username

Answer: BDF
Explanation:
– Storage Type: The storage type needs to be specified during the commissioning of new hosts in VMware Cloud Foundation, as it is important for the configuration of storage resources for the hosts.
– SSO Domain Name: The Single Sign-On (SSO) domain is an essential parameter to associate the hosts with the existing authentication domain.
– Username: The administrator needs to provide a username with appropriate permissions to configure the hosts during the commissioning process.

NEW QUESTION 20
An administrator needs to configure an ESXi host and create a host profile to ensure consistent configuration across multiple hosts in a cluster. Which three steps are necessary to achieve this? (Choose three.)

A.    Configure the desired settings on a reference ESXi host.
B.    Extract the host profile from the configured reference host.
C.    Manually configure each host to match the reference host settings.
D.    Remediate the non-compliant hosts to ensure they match the host profile.
E.    Apply the host profile to all hosts in the cluster.

Answer: ABD
Explanation:
First, configure the desired settings on a reference ESXi host. This host will be used as the template for creating a consistent configuration across the cluster. After configuring the reference host, extract the host profile from it. This captures the configuration of the reference host as a host profile. Remediation is necessary to ensure that other hosts in the cluster align with the reference host’s configuration. The host profile can be applied, and remediation will correct any non-compliant settings on other hosts.

NEW QUESTION 21
……


100% valid 2V0-11.25 exam questions from PassLeader 2V0-11.25 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 2V0-11.25 VCE and PDF dumps: https://www.passleader.com/2v0-11-25.html (99 Q&As)

P.S. Free & New 2V0-11.25 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1_yZyc4K5JnmsVuYnWEFwJajSPz-d8coF