[13-June-2022] New 5V0-42.21 Dumps with VCE and PDF from PassLeader (Update Questions)

100% valid 5V0-42.21 exam questions from PassLeader 5V0-42.21 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 5V0-42.21 VCE and PDF dumps: https://www.passleader.com/5v0-42-21.html (55 Q&As)

P.S. Free & New 5V0-42.21 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1o2_X5QkgIgqhPtBVsz-npBkkoMOZTGZl

NEW QUESTION 1
A customer is using Office 365. How would the VMware SD-WAN recognize this application correctly?

A.    The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
B.    Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.
C.    Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
D.    VMware SD-WAN will use SSL inspection to detect Office 365.

Answer: D

NEW QUESTION 2
A technician needs to SSH to it VMware SU-WAN Virtual Edge running version 3.3.2. What is the default password?

A.    admin
B.    no password required
C.    password configured in cloud_init
D.    velocloud

Answer: C

NEW QUESTION 3
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN. Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?

A.    Branch to Non VMware SD-WAN Site.
B.    Branch to SD-WAN Hub.
C.    Branch to Main Office VPN.
D.    Branch to Branch VPN.

Answer: A

NEW QUESTION 4
An administrator has been receiving complaints about their SaaS business collaboration apps. Which network service should the administrator use to resolve the issue?

A.    Backhaul.
B.    Multi-Path.
C.    CoS mapping.
D.    Direct.

Answer: D

NEW QUESTION 5
Which VMware SD-WAN component Is responsible for overlay route distribution?

A.    VMware SD-WAN Controller
B.    VMware SD-WAN Orchestrator
C.    VMware SD-WAN Edge
D.    VMware SD-WAN Hub

Answer: A

NEW QUESTION 6
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account. Which authentication protocol is supported?

A.    OpenID Connect (OlDC)
B.    LDAP
C.    SAML 2.0
D.    TACACS+

Answer: C

NEW QUESTION 7
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer’s branches and data centers. The network architect would like to achieve control plane redundancy. Which action, if any, should be taken to meet this goal?

A.    Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already.
B.    Multiple VCFs at data centers can be contoured to function as route reflectors to achieve control plane redundancy.
C.    VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
D.    VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy.

Answer: B

NEW QUESTION 8
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge. Which description is correct about default route?

A.    A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway.
B.    It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
C.    When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
D.    The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.

Answer: A

NEW QUESTION 9
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
– Allow business abstraction so that similar policies can be applied across different hardware types.
– Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
– Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?

A.    Select WAN Link, and then define the DSCP tagging.
B.    Select Error Correct Before Steering with % definition.
C.    Select Transport Group, and then select Preferred option.
D.    Deselect Error Correct before Steering Defaults.

Answer: A

NEW QUESTION 10
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways. Which Gateway should be used so all the branches can build tunnels with one another?

A.    Regional Gateway
B.    Super Gateway
C.    Primary Gateway
D.    Alternate Gateway

Answer: C

NEW QUESTION 11
Which form factor can a customer use to deploy VMware SD WAN Edge?

A.    Oracle Virtual Box
B.    Open Virtualization Appliance
C.    Docker Container
D.    Hyper-V Virtual Machine

Answer: B

NEW QUESTION 12
Which statement is true about the VMware SD-WAN Gateway roles and assignments?

A.    Primary Gateway cannot be used as Super gateway for Edge-to-Edge communication, even if all the Edges have a common Primary gateway.
B.    The SD-WAN Orchestrator assigns the Gateways to the Edge automatically when it comes up based on the location of the Edge Branch-to-branch will choose the right Gateway automatically.
C.    If the Primary Gateway goes down. Cloud internet traffic would failover to Secondary gateway automatically.
D.    The Primarily and Secondary Gateways share the load for both internet traffic and VPN traffic.

Answer: A

NEW QUESTION 13
What is considered a typical VMware SD-WAN use case?

A.    Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network design integration options.
B.    Provide high speed layer 2 data center interconnects.
C.    Provide cloud delivered central management Orchestrator to implement complex design network integration options.
D.    Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.

Answer: D

NEW QUESTION 14
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN. What is the main dependency that must be met for the feature to work?

A.    Internet reachability via the private WAN.
B.    Gateway IPs must be routed in the overlay.
C.    Default route learned via dynamic routing.
D.    Static mute for gateway IPs on the edge.

Answer: C

NEW QUESTION 15
……


100% valid 5V0-42.21 exam questions from PassLeader 5V0-42.21 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 5V0-42.21 VCE and PDF dumps: https://www.passleader.com/5v0-42-21.html (55 Q&As)

P.S. Free & New 5V0-42.21 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1o2_X5QkgIgqhPtBVsz-npBkkoMOZTGZl